Integrate Smart Fabric Manager (SFM) with VictoriaMetrics for Secure Telemetry Data Streaming

This section describes how to configure Smart Fabric Manager to securely stream telemetry metrics to the Service Kubernetes cluster.

This procedure assumes that VictoriaMetrics is deployed in cluster mode in the telemetry namespace of the Service Kubernetes cluster. For more information, see the VictoriaMetrics cluster mode documentation.

Prerequisites

Make sure the following prerequisites are met:

  • Ensure that the Secure Shell (SSH) is enabled on the Smart Fabric Manager (SFM) virtual machine. For detailed steps on how to enable SSH, see the Smart Fabric Manager documentation.

  • Ensure that the pod_external_ip_range parameter is set in the omnia_config.yml file for the Service Kubernetes cluster and it is reachable from the SFM network.

  • Ensure VictoriaMetrics (Cluster Mode) is installed and running in the Service Kubernetes cluster.

  • External access to VictoriaMetrics is available through the following LoadBalancer ports:

    • 8480 for ingesting data

    • 8481 for querying data

Steps

  1. Run the following playbook to retrieve the VictoriaMetrics connection details and TLS certificate from the Service Kubernetes cluster:

    cd /omnia/utils
ansible-playbook external_victoria_connect_details.yml
    The external_victoria_connect_details.yml playbook performs the following:

    • Retrieves the VictoriaMetrics vminsert and vmselect LoadBalancer IPs.

    • Extracts the server CA certificate for TLS.

    • Writes the connection details to /opt/omnia/telemetry/external_victoria_connect_details.yml.

    • Saves the CA certificate at /opt/omnia/telemetry/victoria-certs/ca.crt.

  2. In the Smart Fabric Manager for SONiC UI, navigate to Observability, and then select the Settings tab.

    OmniaInstallGuide/images/sfm_observability_settings.png

  3. Under Prometheus Remote Write, select the option button next to vminsert-target, and then select Edit.

  4. Configure the following settings:

    • Enable: ON

    • URL: https://vminsert.telemetry.svc.cluster.local:8480/insert/0/prometheus/api/v1/write

    • Message Version: v1

    • TLS Config: Upload ca.crt from /opt/omnia/telemetry/victoria-certs/ as the Server Certificate File

    Note

    If SFM is installed on a different system than the OIM host, copy ca.crt to that system before uploading it in the UI.

    OmniaInstallGuide/images/sfm_observability_settings_prometheus_remote_write.png OmniaInstallGuide/images/sfm_observability_remote_write_settings.png OmniaInstallGuide/images/sfm_observability_TLS_config.png

  5. Update the etc/hosts file of the Kubernetes Prometheus pod in the SFM VM by performing the following steps:

    1. Log in to the SFM VM.

    2. Run the following command to connect to the SFM VM using SSH with your admin credentials:

      ssh <admin_user>@<sfm_vm_ip>

    3. From the SFM - Main Menu, enter 6 to select Debug Menu.

      OmniaInstallGuide/images/telemetry_sfm_main_menu.png

    4. From the Debug Menu, enter 12 to select Enter Secure Shell. This will open a shell session on the SFM host VM.

      OmniaInstallGuide/images/telemetry_sfm_debug_menu.png

    5. Identify the Prometheus pod using the following command:

      kubectl get pods -A | grep prometheus
    OmniaInstallGuide/images/telemetry_sfm_identify_propmetheus_pod.png

    1. Inside the Prometheus pod, add the VictoriaMetrics insert LoadBalancer IP to /etc/hosts

      kubectl exec -it -n <Prometheus Namespace> <Prometheus Pod Name> -- /bin/sh
echo "<vmselect loadbalancer ip> vminsert.telemetry.svc.cluster.local" >> /etc/hosts
      OmniaInstallGuide/images/telemetry_sfm_propmetheus_pod.png OmniaInstallGuide/images/telemetry_sfm_vminsert.png

View Collected SFM Telemetry Data using VictoriaMetrics UI (VMUI) - Cluster Mode Deployment

To view the SFM telemetry data that is streamed to VictoriaMetrics, do the following:

  1. Run the following command to verify that the VictoriaMetrics pod is running:

    kubectl get pods -n telemetry -o wide | grep vm
OmniaInstallGuide/images/victoria_metrics_pod_cluster_mode.png

  1. Run the following command to verify that that all the services of VictoriaMetrics cluster are running:

    kubectl get service -n telemetry -o wide | grep vm
OmniaInstallGuide/images/victoria_metrics_service_cluster.png

  1. Note the External IP and port number of the vmselect service. The external IP and port number will be used to access the VictoriaMetrics UI (VMUI).

  2. Access the VMUI in a web browser using:

    https://<external vmselect loadbalancer IP>:8481/select/0/vmui

5. Filter and view telemetry metrics using queries in VMUI. For example, the following query displays transceiver DOM temperature values:

transceiver_dom_temperature_value
OmniaInstallGuide/images/victoria_metrics_vmui_cluster.png

The following are some of the key metrics that can be queried:

  • transceiver_dom_temperature_value - Monitors optical transceiver temperature for hardware health

  • queue_tx_pkts - Tracks transmitted packets per queue for performance monitoring

  • queue_drop_pkts - Counts dropped packets per queue to identify congestion issues

  • queue_tx_bits_per_second - Measures queue throughput in bits per second

  • ifcounters_in_octets - Monitors incoming data volume in bytes per interface

  • ifcounters_out_octets - Monitors outgoing data volume in bytes per interface

  • ifcounters_in_pkts - Counts incoming packets per interface

  • ifcounters_out_pkts - Counts outgoing packets per interface

  • ifcounters_in_errors - Tracks input errors per interface for fault detection

  • ifcounters_out_errors - Tracks output errors per interface for fault detection

If you have any feedback about Omnia documentation, please reach out at omnia.readme@dell.com.